FREE DELIVERY ABOVE ₹999 · TRUSTED BY 10,000+ HOMEOWNERSFREE SHIPPING ₹999+ · 10K+ CUSTOMERS
FREE DELIVERY ABOVE ₹999 · TRUSTED BY 10,000+ HOMEOWNERSFREE SHIPPING ₹999+ · 10K+ CUSTOMERS
Watch the Video Tutorial
Full walkthrough · 20 min read
A power drill is the single most-used tool in home DIY. Understanding how to select the right bit, set the correct speed, and drill straight will make every project easier and safer.
Safety First
Always wear safety glasses. Never use a damaged or bent bit. Clamp small workpieces — never hold them by hand while drilling.
Use masonry bits (grey, carbide-tipped) for concrete and brick walls. Use HSS bits (shiny metal) for metal. Use wood bits or spade bits for timber. The bit diameter should match your wall plug size.
Low speed (torque mode) for driving screws — prevents stripping. High speed for drilling. Use hammer mode for masonry walls. Start on the lowest clutch setting for screws and increase if needed.
Mark with a pencil cross. For tiles or smooth surfaces, place tape over the mark first to stop the bit wandering. Start at a low speed with gentle pressure to create a dimple, then increase speed.
Keep the drill perpendicular to the surface — use a small level or mirror. Wrap tape around the bit at the target depth to know when to stop. Apply steady, firm pressure — don't force. Let the bit do the work.
Blow dust from the hole (or use a small brush). Tap the wall plug in flush with a hammer. Drive the screw slowly into the plug — stop as soon as resistance increases to avoid stripping.
All done!
Share your result or bookmark this guide for next time.
Shop the tools and materials mentioned above
